Downloads for AdrenaLinn III, AdrenaLinn II, AdrenaLinn, MPC60, and MPC3000 are available here.

 

A3> AdrenaLinn III

 

AdrenaLinn III Users Manual

Download the complete AdrenaLinn III Manual in PDF format.

AdrenaLinn III Presets & Drumbeats Listing

Download the complete AdrenaLinn III Presets & Drumbeats Listing in PDF format.

AdrenaLinn III OS (operating system) updates

Click here .

AdrenaLinn III MIDI Implementation

Download the AdrenaLinn III MIDI implementation in PDF format.

 

line

> AdrenaLinn II

Upgrading to v2.1.2, the final AdrenaLinn II software release

The final software release for AdrenaLinn II is version 2.1. To learn about it and how to purchase it on 2 chips, visit our online store, accessed from the PURCHASE menu above.

AdrenaLinn II Manual

Download the complete AdrenaLinn II Manual in PDF format.

AdrenaLinn 1 Presets for AdrenaLinn II

Do you like your AdrenaLinn II but miss some of the presets from your AdrenaLinn 1? This MIDI system exclusive file contains all 100 AdrenaLinn presets, translated to work on the AdrenaLinn II. It is of the AdrenaLinn II "all presets and drumbeats" format, contained in a compressed ZIP file.

Download the file AdrenaLinn 1 presets. After downloading, load into your computer's MIDI sequencer, editor or librarian software and tranfer into the AdrenaLinn II via MIDI. (If you don't have a MIDI application, you can use the Windows shareware application MIDI OX. Use the instructions for downloading AdrenaLinn DSP software update 1.6 below.) This will replace all 100 user presets with the AdrenaLinn 1's factory presets. Also, all 100 user drumbeats will be replaced with the AdrenaLinn II's factory drumbeats.

You can also download the AdrenaLinn 1 presets card in PDF format.

AdrenaLinn II MIDI Implementation

Download the AdrenaLinn II v2.1 MIDI implementation. Or if you have the original AdrenaLinn II version 2.0 software, download the AdrenaLinn II v2.0 MIDI Implementation. newer AdrenaLinn II v2.0 MIDI implementation.

 

AdrenaLinn> AdrenaLinn

Upgrading to v1.5/1.6, the final software release for the original AdrenaLinn

The final software release for original AdrenaLinn model is version 1.5/1.6 and includes the final release of presets and drumbeats. To learn about it and how to purchase it on 2 chips, visit our online store, accessed from the PURCHASE menu above.

AdrenaLinn Preset card

Download the AdrenaLinn Presets card in PDF format.

AdrenaLinn Manual

Download the English AdrenaLinn Manual in PDF format.
Download the French AdrenaLinn Manual in MS Word format.
Download the German AdrenaLinn Manual in PDF format.
Download the Korean AdrenaLinn Manual in MS Word format.

Windows editor for AdrenaLinn

This standalone Windows application allows you to remotely edit all of the AdrenaLinns functions from a graphic PC screen, and to save and load preset, drumbeat and "all presets and all drumbeats" files. Click here to download it.

Graphic view of all AdrenaLinn presets

AdrenaLinn user Peter Swetich has created a collection of HTML pages that show graphically the settings of each of the 100 AdrenaLinn presets are they appear in the Windows Editor for AdrenaLinn (above). Note that these cannot be edited; they exist merely to show the settings of each preset in graphic form in order to more easily understand the parameter settings.

This download is a zip file. Download and uncompress it to a folder on your computer, maintaining the file paths in the zip file. (All 'gif' files should go in a folder called "images" within the main folder; all 'html' files except 'default.html' and 'menu.html' should go in a folder called 'html' within the main folder. Click here to download the zip file. To run the application, double-click on the file 'default.html'.

SoundDiver adaptation for your AdrenaLinn

Here is a file to be used within emagic's SoundDiver 3.0 that allows your AdrenaLinn parameters to be edited and managed via your computer. Click here to download the Windows version and here to download the Mac version.

MIDI Implementation

This MS Word document gives details on all MIDI implementation and MIDI System Exclusive communication used in the AdrenaLinn. Click here to download it.

Akai MPC60> MPC60

MPC60 Version 3.10 Users Manual

Download the complete MPC60 version 3.10 Users Manual, in PDF format.

MPC60 Version 3.10, MPC-SCSI, and V3+SCSI installation manuals

Download the Version 3.10 Software Installation Manual, in PDF format.

Download the MPC-SCSI Hard Disk Interface Installation Manual, in PDF format.

Download the Version 3.10 + MPC-SCSI Installation Manual, in PDF format.

Sounds and sequences for your MPC60 version 3.10

Here are a few programs (drum sets) and sequences that may be loaded into MPC60 software version 3.10. To use these files:

  1. Download the file by selecting the appropriate link below.
  2. Uncompress the file and save it to a DOS/Windows 720K formatted floppy disk. (Do not use a 1.4 meg diskette.)

If you are using a Mac, you may need to first enable the "PC Exchange extension" in order to properly format the disk. Then, decompress the contents of the file you just downloaded onto this disk using a utility such as Stuffit Expander or Shrinkwrap.

If you are using a PC, decompress the download file using a utility such as WinZip or PKUNZIP, saving the contents to a 720K Windows/DOS floppy disk.

  1. Place the floppy in your MPC60 and load the files from the disk.

Here are the files:

Here is a set of TR-808 sounds:

Mac: tr808.sit (448K)
PC: tr808.zip (325K)

Here is a set of great-sounding ethnic drums:

Mac: World_Bt.sit (691K)
PC: World_Bt.zip (506K)

Here is a copy of the 2-disk "Ambient Stereo Drum Set", included with version 3.10:

Disk 1 (PC only): amb_set1.zip (408K)
Disk 2 (PC only): amb_set2.zip (356K)

Here is a copy of the "Orb Euro House Drums" sequences & sounds disk, by MIDI Mark Productions, included with version 3.10:

PC only: mm_orb.zip (550K)

Here is a copy of the "MIDI Mark Loop" sequences & sounds disk, by MIDI Mark Productions, included with version 3.10:

PC only: mm_loops.zip (494K)

File Recovery Utility for MPC60

If you find that one of more files have mysteriously disappeared from one of your MPC60 floppy disks, but the free space on the disk indicates that they are still there, the disk may have a damaged "directory". This utility may help restore the lost files. To use it:

  1. Download the file SYSTEM.ZIP.
  2. On Windows, uncompress the downloaded file using WinZip from www.winzip.com. On Mac, uncompress using Stuffit Expander, included in Mac OS. The uncompressed file is called 'system.sys'.
  3. Copy this file to an MPC60-formatted floppy disk. (If this doesn't work, try formating a floppy to Windows 720k format in a Windows or Mac computer and copying the file to this disk. Don't use 1.4 meg disk format.)
  4. Insert the disk in your MPC60's drive and turn power on. After about 20 seconds, instructions will appear on the screen to guide you through the process of repairing a damaged MPC60 floppy disk.

NOTE: As of 8/16/05, this SYSTEM.ZIP is a new file. The previous file was corrupted and didn't work. Sorry for taking so long to notice this problem.

MIDI File Conversion Utility for the MPC60

Have you lost the MIDI File Conversion Utility Disk included with version 3.10? If so, you can download it here.

NOTE: As of 8/10/05, our good Rohan Mansell of Australia found a problem in the file we previously had here and made this corrected version:

  1. Download the file MPC60MFC.zip.
  2. On Windows, uncompress the downloaded file using WinZip from www.winzip.com. On Mac, uncompress using Stuffit Expander, included in Mac OS. The uncompressed file is called 'mpc60mfc.sys'.
  3. Copy this file to an MPC60-formatted floppy disk. (If this doesn't work, try formating a floppy to Windows 720k format in a Windows or Mac computer and copying the file to this disk. Don't use 1.4 meg disk format.)
  4. Insert the disk in your MPC60's drive and turn power on. After about 20 seconds, instructions will appear on the screen to guide you through the process of converting your MIDI or SEQ file.

Users Manual for Akai's Last released MPC60 Software, Version 2

Here's a PDF version of the Akai's Users Manual for the last software version for the MPC60 and MPC60-II, version 2.

Akai MPC3000> MPC3000

Version 3.12 software for the MPC3000

This software version for the MPC3000 is identical to the normal MPC3000 shipping version 3.11 except for the following: it permits the loading of stereo sounds and large 2-part sound files (larger than one 793k floppy disk) than can be created by a version 3.10 MPC60.

Note: This is NOT a full software update for the MPC 3000. This process will temporarily load a new OS into RAM, and will not be saved when you turn off the power. To use this software:

  1. Download the file m3k_v312.zip.
  2. Decompress the download file using a utility such as WinZip or PKUNZIP (PC) or Stuffit Expander (Mac).
  3. Copy the file onto a 1.4 megabyte floppy.
  4. Insert the disk into your MPC3000 and turn the power on. After about 45 seconds, the MPC3000 will be running v3.12. After loading the MPC60 sounds and saving them, reboot the MPC3000 without the v3.12 disk in the drive to resume running your internal software version. While running v3.12, your available sequence memory will be reduced by approximately 10%.

Roger Linn Design | Berkeley, CA, USA

Copyright © 2001-2010 Roger Linn Design. All rights reserved.